Keep Warm this Winter with Regular Furnace Maintenance

There is nothing worse than waking up freezing cold in the middle of the night during the winter. It’s difficult to get comfortable when the whole feels like an icebox, let alone get a good night’s rest.

To avoid this before the real winter weather begins look out for the best furnace repair in Mississauga so you can avoid those dark, freezing cold nights.

Take a look at these DIY (Do It Yourself) maintenance tips to try before your contact your trusted HVAC repairperson.

Make Sure Your Thermostat is Turned On

It might sound a little silly, but always ensure that your thermostat is set to “heat” and that it’s set to at least five degrees above room temperature. Here are a few steps you can take to make sure that it’s on the right setting:

  • Check the batteries — If it’s run on batteries, be sure to check and change them at least once a year.
  • Open up the thermostat and blow out excess dust or debris — If it hasn’t been cleaned in a while, it might be clogged.
  • Check the breaker — If it’s on, turn off the breaker and check the fuse for the furnace.

Reset the Home Circuit Breaker

Is there no heat coming out of the furnace at all? This could be for a number of reasons, but it might be because the circuit breaker needs to be reset.

Make sure that the thermostat is set to “Heat.” Then, move the dial up and down a few degrees to check to see if there is a noticeable difference in temperature.

If nothing is noticed, check to see if either the circuit breaker or fuse was blown or tripped.

Go to your home’s breaker panel and identify the circuit that controls the furnace. Look to see if it’s on the “Off” position or whether it’s in the middle.

You can manually test the breaker by flipping it back and forth while making sure that it’s on the “On” position. This will reset the breaker, and if that doesn’t do the trick, you have a problem with either the circuit breaker itself or the wiring in the circuit.

This is something your trusted, local HVAC contractor can tackle with a professional and experienced eye.

Check the Filter

Often, if there isn’t enough heat coming out it means that the filter of your furnace is clogged and needs to be changed or replaced.

Replacing your furnace filter regularly is fast and simple and integral to the long-term sustainability of your HVAC system.

Take a look at these easy steps:

  • Find your filter — Some furnaces have their filter in the intake. This most likely looks like a grate in a wall, ceiling, or floor. Filters can also be found in the furnace itself.
  • Check your filter – Hold the filter up to the light. If no light shines through then it needs to be changed or replaced. Do you have a dirty smell coming from the vents when the blower turns on? That’s another sign the filters need to be checked.

Don’t get stuck with a broken furnace this winter. Contact your local furnace repair contractor to learn how to keep your HVAC system running smoothly all through the year.

Home Improvements

Related Articles

0 Comment